Car Interior Removal Tool

• Enables easy removal of car panel upholstery.
• Removes panel clips without damaging surround areas.
• 235mm Door Upholstery Clip Remover 
• For quick release of door panels and upholstery clips. 
• Can be used for nearly all vehicles.

​Colour may vary. 

• Stainless steel Bottom eye x2
• Turnbuckles x2  H/D
• Stainless steel cables x2  
• Stainless steel Top eye X2
• Stainless steel Bottom eyes  x2 
• Plus heat shrink to make a neat job of your Bushcables.

Land Rover Puma Defender

Clutch alignment tool.

Engineered to hold the clutch friction plate centered on the flywheel while fitting the clutch cover plate.

Suitable for Land Rover Puma Defender, fitted with 'Duratorq' engines.

Land Rover 200/300 Tdi Head Gasket Torque Angle Gauge

Used for precise torque adjustment on the head bolts of Land Rover engines when changing the head gasket. As outlined in the workshop manual.

For a 1/2" drive breaker bar.

• Slide Hammer
• 11 to 16mm (3/8" to 1/2")
• 15 to 19mm (9/16" to 11/16")
• 18 to 25mm (5/8" to 1")
• 26 to 32mm (1" - 1 1/4")
• Blow moulded plastic case keeps all the tools organized and easy to transport

Are your Defender dashboard lights giving off a dull glow? Its probably because of the grim green bulbs inside....

Here we have 4 x replacement LED Bulbs specifically designed to give off a brighter, whiter light to your dashboard clocks and dials. 

These bulbs are 100% brand new & high quality:

• High intensity LED
• High tech, super bright LED and Low temperature, lowest power-consumption   
• Long service life   
• Easy installation, no any modification need, just plug & play   

Specifications:   

• Light color:  White   
• Working voltage:  DC 12V

Think security....

Complete number and letter stamping set. Useful for stamping your personal details onto vehicle parts or expensive tools, which may assist in the event of theft. 

Simply place the number or letter in the automatic punch and stamp where required. 

Punch Sizes 1/8"

All contained in a heavy duty plastic case. 

Includes:

26pc set of letters A-Z

9pc Set of number punches 0-8 (6 can be used as a 9)

1pc Decimal (.) punch

1pc Ampersand (&) punch

Battery Isolator Cut Off Terminal with Bridging Fuse Holder. 

ADD A SECURITY LAYER TO YOUR VEHICLE! 

Green tightening wheel for quick electrical disconnection.

Simply remove the negative lead from batery, bolt the switch to the negative battery post and reconnect the battery lead to the post on the end of the switch. 

Suitable for both diesel and petrol engines. 

Zinc copper plated, 86mm x 36mm

Colour of fuse holder may vary. 

Adaptor Socker for Centre Diff Stake Nut

Ref: LRT-41-007 

Adaptor for centre differential stake nut to allow tightening by standard 1/2" drive socket tools.

When rebuilding a transfer box, this essential tool is for tigtening down the stake nut which retains the bearings.

Rebuilding a transfer box can be done with most common workshop tools, this socket is the only specialist tool not usually found in the workshop and is essential for tightening the stakenut to the correct torque value, during a transfer box rebuild operation, the stakenut is torqued and removed several times to check for correct tollerances, before the final torque and the stakenut set.

Application: LT230R and LT230T transfer gearboxes.

Manufactured from billet steel and electroplated for corrosion resistance to be a cost effective replica of the official LR tool number LRT-41-007 
Old tool number: 18G1423

Flare Ring Spanner Set 8 9 10 & 11mm

Ideal for the toolkit when working on brake pipes.

• Split / Flare Ring Spanner. Ideal For Working In Confined Spaces
• Flare Ring Spanner allows Access Over The Pipe Then Lower Down On To The fastner.
• Slips On to the pipe with ease without it being to slack.
• 8 & 9mm - 125mm Long.
• 10 & 11mm - 139mm Long.
• Drop Forged
• Nylon Storage Pouch.